Storage data program, Save the data – HITEC X2 Ultima: DC/DC, 200 Watt, Dual Port Multi-Charger User Manual

Page 24

For your convenience, the X2 Ultima has a data storage and load program. It can

store the data of ten batteries, representing the respective specifications of each

battery. You can call back the data when charging or discharging without re-setting

the program. Press the

Start/Enter key to make it blink, and use the Inc or Dec to

set up the parameter.

Storage data program

STORAGE DATA PROGRAM

Voltage

Data

number

CapacityType of

battery

Start

Enter

Setting of the parameter in the screen will not affect the

charge and discharge process. It simply presents the

specification of the battery. The example screen shows a

NiMH battery pack, including 12 cells, with a capacity

of 3000mAh.

DEC INC

DEC

D E C

INC

Start

Enter

Batt type

stop

Set up the discharge current and the final voltage.

Set up the charge current in the "manual" mode, or the current

limit in the "auto" mode. Press the

Inc and Dec key

simultaneously to make the current field blink to switch

the charge mode.

DEC INC

Save the data.

DEC

INC

Start

Enter

Set up the charge/discharge sequence and cycle number.

'> 3 seconds'