Hanna Instruments HI 8614N - Manual (Page 16)

30 31
Hanna Instruments reserves the right to modify the design, construction and
appearance of its products without advance notice .
RECOMMENDATIONS FOR USERS
Before using these products, make sure that they are entirely suitable
for the environment in which they are used.
Operation of these instruments in residential areas could cause
unacceptable interferences to radio and TV equipment, requiring the
operator to follow all necessary steps to correct interferences.
Any variation introduced by the user to the supplied equipment may
degrade the instruments’ EMC performance.
To avoid damage or burns, do not perform any measurement in
microwave ovens.
All rights are reserved. Reproduction in whole or in part is prohibited
without the written consent of the copyright owner.
EXTENSION CABLES FOR SCREW-TYPE ELECTRODES ONLY
(SCREW TO BNC CONNECTOR)
HI 7855/1 Extension cable 1 m (3.3') long
HI 7855/3 Extension cable 3 m (9.9') long
HI 7855/5 Extension cable 5 m (16.5') long
HI 7855/10 Extension cable 10 m (33') long
HI 7855/15 Extension cable 15 m (49.5') long
OTHER ACCESSORIES
BL PUMPS Dosing pumps with flow rate from 1.5 to 20 lph
HI 98501 Pocket-size, thermometer with penetration probe
and 0.1°C resolution (range -50.0 to 150.0°C)
HI 6050 & HI 6051 Submersible electrode holders
HI 6054 & HI 6057 Electrode holders for in-line applications
HI 7871 & HI 7873 Level controllers
HI 8427
pH / ORP electrode simulator
HI 931001 pH / ORP electrode simulator with LCD