Hanna Instruments HI 88703 - Manual (Page 28)

28
In the Setup mode, the instrument’s parameters, can be changed. Some parameters affect the
measuring sequence and others are general parameters that change the behaviour or appearence of
the instrument.
The setup mode may be accessed from the main screen by pressing the
SETUP key.
Press ESC or SETUP to return to the main screen.
A list of setup parameters will be displayed with
currently configured setting. Press
HELP for
aditional information.
Press the
ARROW keys to select the parameter
and depending to the parameter type, select the
new value as follows.
Backlight
Values: 0 to 8.
Press the
Modify key to access the backlight value.
Use the ▲ or ▼ keys (alternatively, the ⊳
functional keys) to increase or decrease the value.
Press the
Accept key to confirm or ESC to return to
the setup menu without saving the new value.
Contrast
Values: 0 to 20.
This option is used to set the display’s contrast.
Press the
Modify key to change the display’s
contrast.
Use the
▲ or ▼ keys (alternatively, the ⊳
functional keys) to increase or decrease the value.
Press the
Accept key to confirm the value or ESC to return to the setup menu without saving the new
value.
Average
Option: Enabled or Disabled.
This option is used to enable/disable averaged
measuring mode. If enabled, the instrument takes
10 readings and display the resulting average
value
. The partial average is displayed during
measurement. Press the functional key to enable
or disable this option.
SETUP