Hanna Instruments HI 222 - Manual (Page 15)

15
• The date (mm.dd).
• The year (yyyy).
• The pH calibration offset.
• The pH calibration slope in mV/pH normalized to 25 °C.
Note: If you calibrate using electrodes with pin the electrode condition and re-
sponse gauges appear while the offset and slope are displayed.
• The first pH calibration buffer along with any warning messages issued
while calibrating at this point.
• The second pH calibration buffer along with any warning messages issued
while calibrating at this point.
Note: If the last calibration was a single point calibration, the message for
the second buffer will be: “no bUFF”.
CAL
BUFFER 2
RCL pH