Hall Research SC-VD-2 - Manual (Page 6)

Model SC-VD-2
4
1.2 Features
• Converts analog VGA from any PC (or component from any DVD
player) to Digital DVI output.
• Ideal for use with digital displays such as LCD, plasma, or DLP
projectors.
• Digital output reduces losses associated with analog signals.
• The resolution of any PC or HDTV video signal can be scaled up or
scaled down to any other PC or HDTV resolution. It can also change the
frame rate of the output.
• 50 MB Video memory for real-time frame rate conversion.
• Signal format conversion between RGBHV and YPbPr.
• Input: PC(VGA/SVGA/XGA/SXGA) + HDTV(480i 576i 480p 567p
720p 1080i), @ 60 to 85 Hz
• Output: PC
(VGA/SVGA/XGA/SXGA) + HDTV (480p/576p/720p/1080i)
• Automatically detects input mode and timing parameters
• Allows fine-tuning the output picture to optimum through adjustment of
sampling clock, phase, and position on screen.
• Easy- to- use push buttons and OSD menu control.
2. Installation
2.1 Input connection
The SC-VD-2 can accept both PC and HDTV inputs. When accepting a PC
input use the 15-pin D-sub cable to connect the output of a PC device to the
input connector labeled PC/HDTV on the back of SC-VD-2.
When accepting a HDTV input use a15-pin D-sub to YPbPr/3 RCA cable
to connect the YPbPr output (or YCbCr) of a HDTV device to the
PC/HDTV input connector of the SC-VD-2.
The SC-VD-2 can automatically detect the mode and resolution of the
PC/HDTV input (The mode can also be forced via OSD menu).