Hall Research HR-731-S - Manual (Page 5)

HDMI and Serial over Single Fiber
3
2.0 Features
 1 HDMI input
 Transmits uncompressed HDMI video along with RS-232 to 1000m
 Supports Deep-color (HDMI 1.3 or 1.4) and 3D
 Compatible with DVI video (with DVI to HDMI input cable)
 Status indication of fiber-optic link, Source video, RS232 or CEC
extension
 Bi-directional RS-232 data transmission between the sender and the
receiver
 RS-232 control of the data channel selection and setup
 Safety interlock does not turn on high-power fiber LED drivers unless
fiber-optic cable is plugged in at both ends
 Locking HDMI connectors
 Green design, turns off parts of circuit when they are not in use
 Compact, Rugged, Reliable, and Economical
 Made in USA
3.0 Precautions
This device is a Class 3R Laser device
(per IEC 60825-1:2007) and can cause
damage to eye sight if used improperly.
Refer to ANSI Z136 for proper handling
and usage of Class 3R devices.
This device is sensitive to Electrostatic
Discharge (ESD). Prior to touching the
unit (especially the connectors), touch a
grounded object, and make sure the
devices that will be plugged in to the
HR-731-S and HR-733-R are properly
grounded.