GoDEX EZ1105 series - Manual (Page 10)

EZ1105 / EZ1305 User Manual
6
2. Printer setup
This printer supports the following printing methods:
Thermal transfer
printing (TTP)
Requires a ribbon for transferring a printed image to a medium.
Direct thermal
printing (DTP)
Does not require a ribbon, only thermal paper.
Please check which printing method you are using and alter the settings accordingly in
the printer driver and/or software.
2-1. Loading the ribbon
1. Place the printer on a flat
surface. To open the printer
cover, press the release
buttons on both sides of the
printer housing and lift the
cover.
2. Install the ribbon rewind core
by placing first its right-hand
side and then its left-hand side
on the holder.
3. Release and lift the print
mechanism.