12 servicing – Glow-worm Compact 80E User Manual

Page 26

221742D

BURNER
RETAINING
BRACKET

Pull bracket
forward to
remove

SECURING
LIP

RIGHT HAND SIDE OF BURNER

LEFT HAND SIDE OF BURNER

Pull burner
forward to
remove

BURNER
GUIDE

12 Servicing

6963

Diagram 12.4

6962

Diagram 12.5

12.3 Cleaning Main Burner

Use a vacuum cleaner or suitable brush to clean the burner
thoroughly, making sure that all burner ports are clear and
unobstructed.

Do not use a brush with metallic bristles.

12.4 Service Checks

Inspect the spark and sensing electrodes, Clean or renew if
necessary, refer to Sections 14.4 and 14.5.

Check the main injector, cleaning or renewing as necessary,
refer to Section 14.3.

Diagram 12.1

7648

BURNER

SECURING
SCREW (3)

LEADS (3)

SENSING
ELECTRODE

SILICONE
SLEEVE (3)

IGNITION
ELECTRODE

Diagram 12.2

7306

Diagram 12.3

7307

Before replacing any of the parts removed during servicing,
inspect the condition of all seals and joints, renewing them as
necessary.

Check the condition of the combustion chamber insulation.
If renewing, refer to Section 4.27.

SECURING SCREW

AIR PRESSURE
TUBE (2)

ELECTRICAL CONNECTIONS

FAN

FLUE
COLLECTOR

When refitting
make sure the
burner is located
in the burner guide
and fitted properly.

When refitting
make sure the
bracket is located
in the guide
and fitted properly.

GUIDE