Generalmusic GRP-800 - Manual (Page 15)

Page10
owner's manual rp800
Page11
owner's manual rp800
DATA
BALANCE
DATA
BALANCE
DATA
BALANCE
Marker Loop play mode
The piano song library
containing 50 important songs of pianistic repertoire.
Song selection
Just press the LIBRARY button on the panel to enter
in library mode. The LIBRARY button led goes on,
the display shows the song library #1. Press the
PLAY button to start this song. Press BALANCE DATA buttons to select another
song. The display shows the song number you
have selected.
NOTE: to search the song in the library please refer to the
complete song title list at the end of this owner's
manual.
Once selected a song press PLAY to execute.
Selecting a song from the library using the piano keyboard
Muting music part in a song from the library
The Rp 800 keyboard can be used to select any of the internal library songs, instead of using the selection buttons.
Press the LIBRARY button to enter in the library mode. Press a key on the keyboard to start song.
NOTE: please refer to the complete library song title list at the end of this owner's manual.
Each of the songs in the library has been accurately programmed separating the music parts played by the
left and the right hands. In this way you can study each piece in a very accurate and effective way. Note that
playing any of these songs the TRACK buttons leds are ON, this means that both tracks are employed.
Tempo speed editing in a song from the library
LEFT HAND disabling,
press TRACK 1 button,
the led goes OFF
RIGHT HAND disabling,
press TRACK 2 button,
the led goes OFF
While playing a song from the library it is possible to enable the metronome and to adjust its speed. This
may help to analyze and study any piece of music in a very accurate way.
may help to analyze and study any piece of music in a very accurate way.
Enable library Enable library Play a song Play a song Enable metronome Adjust tempo speed Adjust tempo speed
During the song play it is possible to set "on fly" two marker points (A and B). The Rp 800 sequencer will play
automatically in loop beetwen these two points. Press the STOP button two times to exit the loop mode.
MARKER "A" setting:
Press the DATA - button
keeping the PLAY button
pressed
MARKER "A"
MARKER "B" setting:
Press the DATA + button
keeping the PLAY button
pressed
MARKER "B"
The marker loop mode works also with a user song recorded in the sequencer.