Generalmusic GRP-800 - Manual (Page 12)

Page8
owner's manual rp800
Page9
owner's manual rp800
DATA
BALANCE
DATA
BALANCE
DATA
BALANCE
METRONOME: playing with a metronome guide
Press the METRONOME button on the panel to enable
the metronome click. The led of the button will be lit
on, and the display shows the default metronome (120
BPM), in a range from 20 to 240 BPM. Press the SELECT/TEMPO buttons to change the
current beat value.
Decrease
value
Press again the METRONOME button to switch off
the metronome click.
ETC.
Metronome parameters editing
Keep the METRONOME button pressed for more than 2 sec. The Rp 800 enters the metronome parameters
editing menu. The display shows the first parameter: TIME SIGNATURE. Press the BALANCE/DATA button
to set the time metrical suddivision you need.
The led blink in sync with The led blink in sync with
the metronome
4/4 default value
Display Sign.
2-4
2/4
3-4 3/4
4-4 4/4
5-4 5/4
6-4 6/4
7-4 7/4
3-8 3/8
6-8 6/8
9-8 9/8
128 12/8
2-2 2/2
3-2 3/2
4-2 4/2
Selectable values
Press again the SELECT/TEMPO button to select the next parameter: ACCENT. Enable/disable the
metronome accent by pressing the BALANCE/DATA buttons.
Press again the SELECT/TEMPO button to select the next parameter: metronome VOLUME. The metronome
volume can be set in a range from 0 to 127.
Default volume value
Increase
value
Decrease
value
If you don't press any buttons for about 5 sec. the Rp 800 automatically exits the edit menu.
ETC.