beautypg.com

Song player/rec: recording a song, Recording track 2, Playback mode – Generalmusic GRP-800 User Manual

Page 13

background image

Page8

owner's manual

rp800

Page9

owner's manual

rp800

SONG PLAYER/REC: recording a song

Press the RECORD button to prepare recording.

The STOP/PAUSE, TRACK1 and REC buttons led
start blinking. The instrument is ready for start
recording on track num.1. At this point you can
select any of the Rp 800 sound preset and play.

Press the PLAY button to start recording.

The display shows the bar numbers, while the dots
start blinking as a reference guide.

Playing the piano the instrument will record all the
event like keyboard esecution, pedals moving, presets
changing etc. Press the button STOP to stop recording.
Then press PLAY to listen to your recording.

Recording Track 2

Once you have recorded track number 1 using any of the Rp 800's presets, it is possible to select another
preset on track number 2, further enriching the execution.

Once recorded on track 1 press the RECORD
button again.

button again.

The track 2 button led blinks notifying the "ready to
record" status of the track.
The track 1 led is on, advising that the track is already
recorded.
Press the PLAY button to start recording the second
track. During the recording you'll listen the part
already recorded on track 1.

Press the button STOP to stop recording.

Current

beat

number

Next press the PLAY button, to listen to the playback
of both tracks.

the led stops

blinking

During the playback each track can be enabled
or disabled by simply pressing the corresponding
track button.

Track PLAY

Enabled : led ON

Track PLAY

Disabled : led OFF

Playback mode

Once a track is already recorded in the sequencer, two Play/Stop modes are possible.

Once a track is already recorded in the sequencer, two Play/Stop modes are possible.

Song PLAY

Press STOP for one time,

the button led starts

blinking

blinking

Now press PLAY, the playback starts from
the same point where the song was stopped

(Continue mode)

(Continue mode)

Led ON

Song PLAY

Press STOP for two times,

the button led goes OFF

Now press PLAY, the playback starts from the
begin of the song (Go to Start mode).

1

2

This manual is related to the following products: