D-Link WIRELESSADSLROUTER DSL-G604T - Manual (Page 89)

DSL-G604T 54Mbps Wireless ADSL2/2+ Modem/Router Manual
89
Line Splitter
If you are instructed to use a “line splitter”, you must install the device between the Router and the
phone jack. Use standard telephone cable with standard RJ-11 connectors. The splitter has three RJ-11
ports used to connect to the wall jack, the Router and if desired, a telephone or telephone device. The
connection ports are typically labelled as follows:
Line - This port connects to the wall jack.
ADSL – This port connects to the Router.
Phone – This port connects to a telephone or other telephone device.
The diagram below illustrates the proper use of the splitter.
Line Splitter Installation