EXFO ETS-1000L - Manual (Page 25)

Remote Management
Ethernet Tester Analyzer 19
Upgrading Versions of the Software
Upgrading Versions of the Software
To upgrade to the latest versions of software:
1. Establish connection with the unit over Telnet protocol. Provide user
name and password.
2. Enable TFTP server (tftp on command in configure mode).
If you use Linux operating system:
1. Configure TFTP client for a work in binary mode (mode binary
command).
2. Connect to the unit by means of TFTP client (connect IP-address of
unit command).
3. Upload software package file with the new version of software (put
path-to-file/image X.X.X.fs).
If you use Windows operating system:
1. Install tftp client on yor PC (WinAgents TFTP Client for example).
2. Enter in console terminal.
tftp.exe -i 192.168.1.1 put C:\work\image_X.X.X.fs
When the software package file is uploaded ETS-1000L will automatically
reboot.
Note: If current and new versions of the software are too different, default
settings are restored.
Note: If current and new versions of the software are too different, default
settings are restored. In case of unsuccessful upgrade, the functionality of
the unit may be restored. Hold the L button for 5 seconds while turning on
the power. Normal operation will be restored within 1 minute.