EXFO ETS-1000L - Manual (Page 15)

Ethernet Tester Analyzer 9
3 Getting Started
Before configuring and performing tests on the ETS-1000L analyzer, turn
the unit on.
To turn the unit on:
1. Get the unit from the box and make the external inspection.
2. Connect the power supply unit to the electric network (if you use
mains voltage 110-240 V with 50/60 Hz frequency) and to the
ETS-1000L.
The unit is ready in 15 second.
3. To turn off the unit switch off the power supply unit.
Note: if you want to restore default settings of the unit hold the button of a loop’s
level choice (L) for 5 seconds. Three LEDs will flash once for a second to
inform you.