ENMET EX-2000 - Manual (Page 11)

EX2000 ENMET Corporation
7
3.2 Shutting down the EX-2000
To turn off the EX-2000 press and hold the ENTER switch.
Example of display at shut down:
Display Sequence
The display indicates count down of shut down:
1. Hold down ENTER switch while instrument counts down internal shut
down sequence.
2. Audio alarm beeps once to indicate the instrument is off.
3. Release the ENTER switch.
3.3 Charging the EX-2000
The EX-2000 is powered by a rechargeable NiCd battery pack, 3.6V – 0.8 Ah.
The battery pack is connected directly to the main PCB
The expected operating battery charge is 16 hours under normal use. It is recommended that the batteries be completely
discharged at least once a month, and then fully recharged to maximize the life of the cadmium-nickel batteries.
Too completely, discharge the EX-2000 operate until it automatically shouts down.
To charge the EX-2000 battery, plug the charger into the Program/Charge Port on the left side of the instrument. See figure 1
for location. Maximum recharge time is 16 hours.
2 OFF
1 OFF
0 OFF