ENMET EN Series - Manual (Page 8)

Sensor/Transmitter, Toxic Gas & Oxygen ENMET Corporation
6
5.0 ENMET Part Numbers
5.1 Replacement Sensors
Sensor Gas Type ENMET Part Number
Chlorine 67020-0100
Hydrogen Sulfide 67020-0201
Hydrogen Cyanide 67020-0300
Hydrogen Chloride 67020-0400
Sulfur Dioxide (with H2S filter) 67016-0500
Phosgene 67020-0600
Hydrogen Fluoride 67020-0700
Ozone 67020-0803
Oxygen 67016-1106
Oxygen MRI 67013-008
Carbon Monoxide: For S/T P/N ending in -1203 67020-1201
Carbon Monoxide: For S/T P/N ending in -1207 67016-1200
Fluorine 67020-1400
Hydrogen 67020-1500
Nitrogen Dioxide 67020-1700
Nitric Oxide 67020-1750
Ammonia 67020-2400
Arsine 67020-4001
Phosphine 67020-4002
Silane 67020-4003
5.2 Calibration Gases
Calibration Gases and Accessories
Calibration gas part numbers are given in Table 1, in Section 4.0.
Adapter Style ENMET Part Number
For Ammonia, Nitric oxide, Hydrogen chloride, Hydrogen cyanide 02506-001
For Chlorine and Hydrogen sulfide 02506-002
For Sulfur dioxide and Nitrogen dioxide 02506-003
For Oxygen and Carbon monoxide 02506-000
Calibration Cap (required with all adapters) 03620-010
Calibration Cap Reactive Gases Contact ENMET
Calibration Cap Catalytic Sensor 03620-012
Calibration Regulator w/cal cup Oxygen, MRI 03600-002
Ozone generator, 0.5 to 5.0 ppm at 1.0 l pm 04055-0800