ENMET QUADRANT - Manual (Page 20)

ENMET Corporation QUADRANT
14
7.0 Warranty
ENMET warrants new instruments to be free from defects in workmanship and material
under normal use for a period of one year from date of shipment from ENMET. The
warranty covers both parts and labor excluding instrument calibration and expendable parts
such as calibration gas, filters, batteries, etc... Equipment believed to be defective should be
returned to ENMET within the warranty period (transportation prepaid) for inspection. If the
evaluation by ENMET confirms that the product is defective, it will be repaired or replaced
at no charge, within the stated limitations, and returned prepaid to any location in the United
States by the most economical means, e.g. Surface UPS/RPS. If an expedient means of
transportation is requested during the warranty period, the customer is responsible for the
difference between the most economical means and the expedient mode. ENMET shall not
be liable for any loss or damage caused by the improper use of the product. The purchaser
indemnifies and saves harmless the company with respect to any loss or damages that may
arise through the use by the purchaser or others of this equipment.
This warranty is expressly given in lieu of all other warranties, either expressed or implied,
including that of merchantability, and all other obligations or liabilities of ENMET which
may arise in connection with this equipment. ENMET neither assumes nor authorizes any
representative or other person to assume for it any obligation or liability other than that
which is set forth herein.
NOTE: When returning an instrument to the factory for service:
ƒ Be sure to include paperwork.
ƒ A purchase order, return address and telephone number will assist in the expedient repair
and return of your unit.
ƒ Include any specific instructions.
ƒ For warranty service, include date of purchase
ƒ If you require an estimate, please tell us.