ENMET QUADRANT - Manual (Page 19)

QUADRANT ENMET Corporation
13
6.0 ENMET part numbers for replacement parts and accessories.
Description ENMET part number
Combustible sensor 02601-001
Oxygen sensor 02601-002
H
2
S sensor 02601-004
CO sensor 02601-003
*H
2
S sensor 02601-021
*CO sensor 02601-020
•Replacement Battery Pack, NiCad 02601-006
•Base, charging NiCad/computer interface 02601-005
♦Replacement Battery Pack, NiMH 02601-036
♦Base, charging NiMH/computer interface 02601-037
Power Supply, 110 VDC
67051-046
Replacement Calibration Cover 02602-013
Harness 02602-015
Housing for Alkaline Battery Pack 02602-012
Calibration Gas, 50% LEL Methane 03220-050
Calibration Gas, 100 PPM CO 03219-100
Calibration Gas, 20 PPM H
2
S 03214-020
Field Test Gas:
15% LEL Methane,75 ppm CO, & 18% O
2
03299-000
Calibration Adapter, CO & Methane 02506-000
Calibration Adapter, H
2
S 02506-002
Motorized Sample Pump 03700-011
Aspirator, with 36” probe 02602-010
Aspirator, with 12’ hose 02602-011
Maintenance Software, COM 2000
for QUADRANT 02601-014
Serial Computer Cable 02601-015
*For instruments with serial numbers between 2000 and 4999.
C
AUTION
: Battery Pack and Base Charger are Not interchangeable.
• Instruments with s/n 16700 and below require 02601-006 Battery and must be used
with the 02601-005 Base
♦ Instruments with s/n 16822 and above require 02601-036 Battery and must be used
with the 02601-037 Base. These products have the ATEX/Ex approval label on them.