ENMET RECON-IS - Manual (Page 4)

RECON-IS ENMET
2
2.0 RECON-IS Features
 Advanced 16-digit MCU for low consumption;
 3V Lithium battery life approximate 2 year;
 High contrast LCD displays the gas level and device status;
 Back light based on instruction or alarm status;
 Audio, Visual and Vibratory Indicators;
 Single button operation
 Alarm of: Low-alarm, High-alarm, TWA alert, STEL alert, Over range alert, low voltage alert etc;
 Confidence beep;
 With instruction, it will display STEL value, TWA value, Max. or Min. gas level, confidence beep information;
 Self test on the gas sensor, electric circuit, battery, audio alarm, visual alarm and vibration alarm;
2.1 RECON-IS Configuration and Function
See Figure 1 for location of features:
Feature Description
1 Visual Alarms LEDs
2 LCD Display Multi function, See Section 2.2 for details
3 Audio Alarm(Horn) Low Alarm – Slow Pulse
High Alarm – Fast Pulse
4 Button Multi function, See Section 2.3 for details
5 Sensor See back of unit for Type:
CO, H2S, O2
6 Label Batch (serial number) of Unit
7 Belt Clip
Figure 1: RECON-IS Features