ENMET RECON-IS - Manual (Page 12)

RECON-IS ENMET
10
7.0 Technical Data and Specifications
Detection Method Natural Diffusion
Sensor Electrochemical Sensor
Detection Range & Alarm Levels See Table 1
Operation Condition
Temperature: -20°C – 55°C
Humidity: 5 – 95%RH non condensing
Electrical Power Lithium Battery, DC3.6v CR123A, Rechargeable
Operating Time
Continuous, Non-Alarm Conditions
Approximately:
8 Hours for Combustible (LEL) unit
300 Hours for CO, H2S & O2 units
Charge Time 4 – 6 Hours
Expected Sensor Life 2 years
Ingress Protection IP 65
Approval Ratting
Dimensions 2.4 x 3.9 x 1.3 inches(60x100x33mm)
Weight 5 ounces (140g)
N OTE : All specifications stated in this manual may change without notice.