beautypg.com

Elenco PK101 w/ Computer Interface User Manual

Page 26

background image

The waveform will be easier to view if you adjust the horizontal delay, as shown. Using Wait mode also
helps (press the On-Line button to trigger).

You may also view the frequency spectrum if desired, try these settings.

You’ve finished! Congratulations!

You may use Winscope to view signals on some of the other PK-101 circuits or to look at other
points in the circuits. Just remember that Winscope cannot measure DC voltages and should only be
used with signals of 20-5KHz frequency (see limitations on page 5 for details).

-26-