Fig 1a fig 1b fig 1c – East Coast Supercharging ECS Trans Strut Brace User Manual
Page 2
Installation Instructions:
1. Unpack and check contents of the brace kit.
2. Remove vibration dampner from the differential.
3. Remove and discard left side differential cover bolts.
4. On certain side covers (Z06) there will be casting squares that need to be
cut off. Using an airsaw cut the squares off and grind the area flat with an
airgrinder. (Figs 1a-c)
Fig 1a
Fig 1b
Fig 1c