East Coast Supercharging ECS Paxton SC1500 C6 Supercharger Kit - Manual (Page 5)

•
Moving under the passenger side, remove the horn
assembly with a 13mm socket (fig.10)
•
Behind the horns, and attached to the intake
shroud is the outside air temperature sensor.
Unclip and free sensor from passenger side of
front air shroud. (fig. 11)
•
Use fork tool to unclip two black retaining clips from
main upper air shroud. (fig 12)
•
Remove front sway bar from car by removing
the 2 -18mm nuts on lower control arms, and
4- 13mm bolts from engine cradle. Save all
parts for reinstallation.
•
Unplug electric fan harness located on
passenger side fan assembly. Remove oil
cooler lines and any other lines attached to fan
assembly. (varies by year and transmission
option)
•
Remove 2 10mm screws on either side of fan
assembly. (fig. 13).
10
11
12
13