Troubleshooting – EarthQuake 60005072 User Manual
Page 20
Operator's Manual
Viper Engine, 159cc
Check for parts online at
www.ardisam.com or call 800-345-6007 M-F 8-5
20
engine will not start
Possible cause
correction
1) Check control positions
Choke OPEN
Move lever to CLOSE unless engine
is warm.
Engine switch OFF
Turn engine switch to ON.
2) Check fuel
Out of fuel
Refuel.
Bad fuel; engine started without
treating or draining gasoline, or
engine has been refueled with bad
gasoline
Drain fuel tank and carburetor.
Refuel with fresh gasoline.
3) Remove and inspect spark plugs Spark plugs faulty, fouled or
improperly gapped
Gap, or replace spark plugs.
Spark plugs wet with fuel (flooded
engine)
Dry and reinstall spark plugs. Start
engine with control lever in FAST
position.
4) Take engine to authorized servic-
ing dealer, or refer to manual
Fuel filter clogged, carburetor
malfunction, ignition malfunction,
valve stuck, etc.
Replace or repair faulty compo-
nents as necessary.
engine lacks power
Possible cause
correction
1) Check air filter
Filter element(s) clogged
Clean or replace filter element(s).
2) Check fuel
Out of fuel
Refuel.
Bad fuel; engine started without
treating or draining gasoline, or
engine has been refueled with bad
gasoline.
Drain fuel tank and carburetor.
Refuel with fresh gasoline.
3) Take engine to authorized servic-
ing dealer, or refer to manual
Fuel filter clogged, carburetor
malfunction, ignition malfunction,
valve stuck, etc.
Replace or repair faulty compo-
nents as necessary.
engine operates erratically
Possible cause
correction
1) Check spark plug
Spark plug is defective
Install new, correctly gapped plug.
Spark plug gap is incorrect
Set gap between electrodes at 0.7
to 0.8 mm.
2) Check air cleaner
Air cleaner element is dirty
Clean air cleaner element.
TRoublesHooTInG