Ditch Witch SK850 Footings Machine - Manual (Page 77)

Service - 76
SK850 Operator’s Manual
Startup/10 Hour
CMW
®
Check Hydraulic Hoses
Check hydraulic hoses for leaks at startup and
every 10 hours.
Pressurized fluid or air could pierce skin and cause severe
injury. Refer to operator’s manual for proper use.
270-6035
To help avoid injury:
• Before disconnecting a hydraulic line, turn engine off and operate all controls to relieve pressure.
Lower, block, or support any raised component with a hoist. Cover connection with heavy cloth and
loosen connector nut slightly to relieve residual pressure. Catch all fluid in a container.
• Before using system, check that all connections are tight and all lines are undamaged.
• Use a piece of cardboard or wood, rather than hands, to search for leaks.
• Wear protective clothing, including gloves and eye protection.
• If you are injured, seek immediate medical attention from a doctor familiar with this type of injury.