Ditch Witch SK850 Footings Machine - Manual (Page 46)

SK850 Operator’s Manual
Prepare - 45
Connect Attachment
CMW
®
Connect Attachment
Attachment
1. Position attachment on level surface with enough
space behind it to accommodate unit.
2. Start engine.
3. Tilt mount plate (2) forward.
4. Position mount plate in the upper lip of the receiver
plate (1) on attachment.
5. Raise lift arms while tilting back mount plate.
6. Pins will automatically engage.
NOTICE: Use only Ditch Witch
®
-approved attachments. Attachments can change the stability and
operating characteristics of the unit. See attachment operation manual for instructions regarding proper
operation of attachments.
IMPORTANT: Before connecting attachment to unit,
ensure that mount and receiver plates are free of dirt
and debris.
IMPORTANT: Attachment should be raised
enough to clear the ground. Mount plate
should be tilted back fully.
Read operator’s manual. Know how to use all controls.
Your safety is at stake.
To help avoid injury: Ensure proper connection by verifying that bottoms
of lock pins are visible under attachment receiver plate (shown).
t43om006w.eps
t05om026c.eps
1 2