200 hour, Sk850 operator’s manual – Ditch Witch SK850 User Manual
Page 83
Service - 82
SK850 Operator’s Manual
200 Hour
CMW
®
200 Hour
Change Engine Oil and Filter
Change engine oil and filter every 200 hours.
Raise lift arms and install safety supports. See
“Working under Raised Lift Arms” on page 68.
Drain oil (1), change filter (2) and add 5 qt (4.7 L)
of DEO at fill (3). See page 79.
Check Intake Air Line
Check the intake air line every 200 hours.
If the clamp is loose, apply oil to the threads and
retighten it.
If the hose appears cracked or worn, replace it.
Location
Task
Notes
Change engine oil and filter
DEO
Check intake air line
1/4-1/3” (7-9 mm)
Change hydraulic filter
Check lug nut torque
88-95 ft•lb (108-129 N•m)
Check idler roller bearings
IMPORTANT: Use oil specified in “Engine Oil
Temperature Chart” on page 70.
NOTICE: Keep dust out of the intake air line to
prevent damage to the engine.
1
2
3
t43om018w.eps
t43om019w.eps
- JT5 (161 pages)
- JT922 (159 pages)
- JT9 (165 pages)
- JT20 (195 pages)
- JT1220 (201 pages)
- JT2020 (203 pages)
- JT25 (203 pages)
- JT30 (245 pages)
- JT60 (218 pages)
- JT100 (243 pages)
- AT Air Hammer (11 pages)
- TK Series Manual (61 pages)
- 8500 (77 pages)
- MR90 (121 pages)
- FT5 (28 pages)
- FM5 (57 pages)
- FM13V (46 pages)
- FM25 (67 pages)
- P80 (71 pages)
- OnGrade (63 pages)
- FX20 (100 pages)
- FX25 (119 pages)
- FX30 (149 pages)
- FX50 (141 pages)
- FX60 (157 pages)
- MV800 (111 pages)
- RT Line (115 pages)
- RT30 (97 pages)
- RT45 (203 pages)
- RT55 (177 pages)
- RT100 (161 pages)
- RT115 (252 pages)
- RT120 (223 pages)
- Zahn (105 pages)
- RT80 (203 pages)
- RT115 Q (193 pages)
- RT120 Q (211 pages)
- 100SX (50 pages)
- 410SX (131 pages)
- SK350 (77 pages)
- SK750/SK755 (81 pages)
- SK850 Footings Machine (107 pages)
- 150RT (55 pages)
- 250RT (49 pages)