Sk850 operator’s manual – Ditch Witch SK850 User Manual
Page 65
Trench - 64
SK850 Operator’s Manual
Setup
CMW
®
2.
Engage attachment control.
3.
Increase engine speed to full throttle.
4.
Slowly lower digging boom to depth.
5.
Move ground drive control to desired speed.
6.
Pull ground drive control rearward to desired
trenching speed. Trenching movement is
toward you.
7.
When trench is complete, move ground drive control to neutral.
8.
Adjust throttle to low idle.
9.
Raise boom.
10. As boom clears top of trench, move attachment speed/direction control to neutral.
11. Drive a short distance away from work site.
12. Shut down unit. See page 52 for proper shutdown procedures.
NOTICE:
•
Do not make sharp turns. Lower
boom to full depth when turning.
•
If an object becomes lodged in chain,
move attachment speed/direction
control to neutral and raise boom
slightly. Reverse chain direction. If
object must be removed manually,
turn engine off and engage parking
brake.
t43om033w.eps
- JT5 (161 pages)
- JT922 (159 pages)
- JT9 (165 pages)
- JT20 (195 pages)
- JT1220 (201 pages)
- JT2020 (203 pages)
- JT25 (203 pages)
- JT30 (245 pages)
- JT60 (218 pages)
- JT100 (243 pages)
- AT Air Hammer (11 pages)
- TK Series Manual (61 pages)
- 8500 (77 pages)
- MR90 (121 pages)
- FT5 (28 pages)
- FM5 (57 pages)
- FM13V (46 pages)
- FM25 (67 pages)
- P80 (71 pages)
- OnGrade (63 pages)
- FX20 (100 pages)
- FX25 (119 pages)
- FX30 (149 pages)
- FX50 (141 pages)
- FX60 (157 pages)
- MV800 (111 pages)
- RT Line (115 pages)
- RT30 (97 pages)
- RT45 (203 pages)
- RT55 (177 pages)
- RT100 (161 pages)
- RT115 (252 pages)
- RT120 (223 pages)
- Zahn (105 pages)
- RT80 (203 pages)
- RT115 Q (193 pages)
- RT120 Q (211 pages)
- 100SX (50 pages)
- 410SX (131 pages)
- SK350 (77 pages)
- SK750/SK755 (81 pages)
- SK850 Footings Machine (107 pages)
- 150RT (55 pages)
- 250RT (49 pages)