DICE Electronics DICE interface for iPod Volkswagen - Manual (Page 30)

To set and change scrolling feature press CAT/FLDR button repeatedly until Mode 6 is selected . Change options by
pressing Seek/Track or turning the Tune dial. After setting the desired feature turn off the ignition for at least 50
seconds to engage the new selection.
Certain amount of blinking is normal on some radios when the scrolling feature is on.
Scrolling feature - in SAT emulation, Mode 6
(Only with Audi/VW-SAT kit)
30
XM 1 001
SOFTWARE VERSI
SHORT STAT
SEEK
TRACK
or
TUNE
XM 1 001
SOFTWARE VERSI
SHORT SCROL
XM 1 001
SOFTWARE VERSI
LONG STAT
XM 1 001
SOFTWARE VERSI
LONG SCROL
Firmware versions are displayed while in Mode 6. This may be needed by a support technician if troubleshooting is
necessary. Having this information ready before requesting technical support may expedite the troubleshooting
process.
Firmware version information - in SAT emulation, Mode 6
XM 1 001
CAR 1.00
SHORT STAT
XM 1 001
IPOD 1.00
SHORT STAT
XM 1 001
AUX 1.00
SHORT STAT
XM 1 001
CORE 1.00
SHORT STAT
CAT
FLDR