Dahua Technology HE-T - Manual (Page 79)

79
Figure 5-27
5.5.1 HDD Management
Here is for you to view and implement hard disk management. See
X383H383H383H
Figure 5-28.
You can see current HDD type, status, capacity and record time. When HDD is working properly,
system is shown as O. When HDD error occurred, system is shown as X.
You can select HDD mode from the dropdown list such as read-only or you can erase all data in
the HDD.
Please note system needs to reboot to get all the modification activated.
Important
The read-write HDD is to storage recorded file, the snapshot HDD is to save the image.
You can search the file in the read-only HDD and read-write HDD. The files in the snapshot HDD
can only be searched in the Web.
Figure 5-28
Click alarm set button, the interface is shown as below. See
X384H384H384H
Figure 5-29.
X
(This interface is just
like the abnormity setup). Please refer to chapter 5.5.2 for detail information.
Please highlight icon to select the corresponding function.