Q-See DVR - Manual (Page 8)

Q-See Q25DVR4ES User's Manual Q-See Q25DVR4ES User's Manual
Chapter 4: System Boot - 4.2 Recovering Lost Data
The system will automatically recover lost
data.
A Power Error can cause data to be lost.
Chapter 4: System Boot - 4.3 Restore Recording Feature
If a Power Error occurs during
recording process, the system will
automatically resume recording after
power is restored.
Page 7 Page 20
Chapter 4:System Boot - 4.4 Main Screen
10% While the DVR is running, the monitor
will display the view from the cameras
as well as the following:
Upper left: Percentage of hard drive
space used.
Middle: Channel name (CH 1 through
CH 4).
Bottom right: Date and Time.
Bottom left: Mode, Status, Hard Drive
Info,and Schedule Setting of the DVR.
Refer to 6.1 Start Recording
1 DVR Event List 2. Capture one frame picture
3. Save DVR's Recorded Video to PC 4. Configuration
5. Load Video File Saved in PC 6. Play DVR Video File
7. Play PC Video File 8. Channel Selection Keys
9. Playing Scroll Bar 10. Fast backward
11. Previous Frame 12. Play Backward
13. Pause 14. Play
15. Next Frame 16. Fast Forward
17. Volume Scroll Bar (not used by this unit) 18. Exit
Press to open the event video list.