Cino A770 HC - Manual (Page 61)

F
u
z
z
y
S
c
a
n
P
ro
g
ra
m
m
in
g
M
a
n
u
a
l
Configure Your FuzzyScan
54
PROGRAM
Operation Control
(F & L Series)
♦ ♦ ♦ ♦ Presentation Control, Scan Rate, Flash Duty ♦
♦ ♦ ♦ F_DEFAULT
Family Code Selection P.C Parameter Selection Option Code
Presentation Control
SS
SS
SS Presentation mode
Flash mode
Force mode 0
1
2
Scan Rate Control
SS
SS Dynamic
Fixed 0
1
Flash Duty Cycle
SS
SS
SS
SS 1/2 duty cycle
2/3 duty cycle
3/4 duty cycle
4/5 duty cycle
L680/L780 laser imagers don’t support this function.
0
1
2
3
SmartStand Power Off Timeout
SS
SS
SS 3 mins
5 mins
10 mins
Only available for FuzzyScan Laser model
0
1
2
Presentation Control: When the scanner is placed on SmartStand, the scanner will be switched from hand-held scanning to hands free scanning automatically. Three
hands scanning modes are available. You are recommended to use flash mode or force mode while under insufficient ambient light.
Scan Rate Control: The scanner will have better motion tolerance when you select “Fixed” scan rate. It’s suitable for application which needs higher motion tolerance on
the move. But this may impact to the reading distance.
The Flash Duty Cycle is designed to control the flashing frequency of the light source.
The SmartStand Power Off Timeout is a pre-defined duration for scanner’s light source on time when the scanner is placed on SmartStand. While the scanner is placed on
SmartStand, the scanning-type will be switched from hand-held scanning to presentation scanning and the light source will be forced on automatically. The light source will
be off when the pre-defined duration is up.