Cino A770 HC - Manual (Page 39)

F
u
z
z
y
S
c
a
n
P
ro
g
ra
m
m
in
g
M
a
n
u
a
l
Configure Your FuzzyScan
32
PROGRAM
Symbology Reading Control
♦ ♦ ♦ ♦ GS1 DataBar Setting ♦ ♦ ♦ ♦
F_DEFAULT
Family Code Selection P.C Parameter Selection Option Code
GS1 DataBar Setting
SS
SS
SS
SS
SS
SS Disable GS1 DataBar (RSS-14)
Enable GS1 DataBar (RSS-14)
Disable GS1 DataBar Limited
Enable GS1 DataBar Limited
Disable GS1 DataBar Expanded
Enable GS1 DataBar Expanded
0
1
2
3
4
5
GS1 DataBar Limited
Security Level
SS
SS
SS Level 1
Level 2
Level 3
Only available for GS1 DataBar Limited
Only available for F460, F560 scanners.
0
1
2
GS1 DataBar Min. Length
SS
MS
Default (04)
01-Maximum
Only available for GS1 DataBar Expanded
Scan 2 digits from the option code chart in Appendix; then FuzzyScan will terminate
this selection automatically.
FIN
(2 digits)
GS1 DataBar Max. Length
SS
MS
Default (74)
74-Minimum
Only available for GS1 DataBar. Expanded Scan 2 digits from the option code chart
in Appendix; then FuzzyScan will terminate this selection automatically.
FIN
(2 digits)
GS1 128 Limited Security Level
The scanner F460/F560 offers three levels of decode security for GS1 DataBar Limited bar codes:
Level 1: If you failed to read poorly-printed or out-of-spec. bar codes in level 2, please select level 1. This is the most aggressive setting and may increase the misread.
Level 2: If you are experiencing misread of poor-printed or out-of-spec. bar code in level 3, please select level 2.
Level 3: This is the default setting which allows the scanner to operate fastest, while providing sufficient security in decoding "in-spec." GS1 128 Limited” bar codes.