Use mfgtool to flash android into onboard emmc – Avalue REV-SA01 User Manual
Page 41
REV-SA01 User
’s Manual
REV-SA01 User
’s Manual
41
3.12 Use MfgTool to flash Android into onboard eMMC
Manufacturing tool, a successor of ATK, provides a series of new features to power your
mass production work. The features like windows style GUI, multiple devices support,
explicit status monitoring, versatile functionalities and highly flexible architecture make it a
best choice to meet your critical timing, cost and customization requirements.
For using Mfgtool to flash image file into onboard eMMC, please follow up the steps below
1) Please turn on the Pin4 of the DIP switch as below into burning mode of Mfgtool.
2) Power on the mainboard then plug the cable from OTG socket to PC.
3)
Select the right folder by MCU name, if the MCU of module board is “i.MX6 Solo”,
please click the
folder “~\ MX6DL-IMX6” to flash image file, e.g. mine is D:\
MFG-REV-SA01_Image\MX6DL-IMX6
”
On the other hand, if the MCU of module board is “i.MX6 Quad core”, please click the
folder “~\ MX6Q-IMX6” to flash image file, e.g. mine is
D:\ MFG-REV-SA01_Image\ MX6Q-IMX6
”