Avalue EMS-BYT - Manual (Page 67)

Quick Reference Guide
EMS-BYT Series Quick Reference Guide 67
USB transfer time-out
1 sec
5 sec
10 sec
20 sec[Default]
The time-out value for Control, Bulk, and
Interrupt transfers.
Device reset time-out
10 sec
20 sec[Default]
30 sec
40 sec
USB mass storage device Start Unit command
time-out.
Device power-up delay
Auto[Default]
Manual
Maximum time the device will take before it
properly reports itself to the Host Controller.
‘Auto’ uses default value: for a Root port it is
100ms, for a Hub port the delay is taken form
Hub descriptor.
3.6.2.12 Security Configuration
Item Options Description
TXE EOP Message
Disabled
Enabled[Default],
Send EOP Message Before Enter OS.
Intel® AT
Disabled[Default]
Enabled,
Enable/Disable BIOS AT Code from Running.
Inter® AT Platform PBA
Disabled[Default],
Enabled
Enable/Disable BIOS AT Code from Running.