Network stack configuration, 9 network stack configuration – Avalue EMS-BYT User Manual
Page 64
EMS-BYT Series
64 EMS-BYT Series Quick Reference Guide
Item
Options
Description
Serial-ATA (SATA)
Enabled[Default]
Disabled,
Enable/Disable Serial ATA.
SATA Speed Support
Gen1
Gen2[Default]
SATA Speed Support Gen1 or Gen2.
SATA ODD Port
Port0 ODD
Port1 ODD
No ODD[Default]
SATA ODD is Port0 or Port1.
SATA Mode
IDE Mode
AHCI Mode[Default]
Select IDE/ AHCI.
Serial-ATA Port 0/1
Enabled[Default]
Disabled,
Enable/Disable Serial ATA Port0/1.
3.6.2.9 Network Stack Configuration
Item
Options
Description
CSM Support
Enabled[Default]
Disabled,
Enable/Disable CSM Support.
GateA20 Active
Upon Request[Default]
Always
UPON REQUEST
– GA20 can be disabled
using BIOS services. ALWAYS
– go not
allow disabling GA20; this option is useful
when any RT code is executed above 1MB.
Option ROM Messages
Force BIOS[Default]
Keep Current
Set display mode for Option ROM.
INT19 Trap Response
Immediate[Default]
Postponed
BIOS reaction on INT19 trapping by Option
ROM: IMMEDIATE
– execute the trap right
away; POSTPONED
– execute the traps
during legacy boot.