beautypg.com

Avalue EMS-CDV User Manual

Page 27

background image

Quick Reference Guide

EMS-CDV Quick Reference Guide 27

2.8 Installing Hard Disk & Memory, PCI devices (EMS-CDV)

Step 1. Remove 6 screws from the bottom of your system.

Step 2. Remove the chassis cover.

Step 1. Remove 5 screws to release the HDD bracket.

Step 2.1. Slide HDD into its bracket until properly seated.

Step 2.2. Secure HDD by means of 5 screws.

Step 3. Slide the DDR3 SODIMM into the memory socket and press it down until properly seated.

Step 4. Insert MPCIE cards into designated locations and fasten with four screws to complete MPCIE

installation.

See also other documents in the category Avalue Hardware: