DENSO CORPORATION MOVINCOOL OFFICE PRO 24 - Manual (Page 24)

FI LTER
DAILY INSPECTION & MAINTENANCE (cont.)
Filter Cleaning Method
1) Remove dust from the element with a
vacuum cleaner, or rinse in cold or
lukewarm water. If the element is extremely
dirty, wash with a neutral detergent.
2) After the element has been cleaned, rinse
with clean running water, allow to dry, then
reinstall.
In-Season/Off-Season Inspection & Maintenance
In-Season
1) Check the prongs and surface of the power cord plug for
dust and/or dirt. If dust and/or dirt are present, wipe off
with a clean dry cloth.
2) Check the power cord, plug and prongs for damage or excess
play. If any damage or excess play is found, contact your
MovinCool reseller for repair.
3) Check the air filters and drain tank.
4) Clean the outside of the unit(s) with a damp cloth or mild
nonabrasive cleaner.
Off-Season
1) Operate the unit in Fan Only mode for 8 hours.
NOTE : Operation is necessary to dry out the inside of the unit.
2) Disconnect the power cord from the AC outlet.
3) Check the prongs and surface of the power cord plug for
dust and/or dirt. If dust and/or dirt are present, wipe off
with a clean dry cloth.
4) Check the power cord, plug and prongs for damage or excess
play. If any damage or excess play is found, contact your
MovinCool reseller for repair.
5) Clean the air filters.
6) Empty all water from the drain tank.
24