DENSO CORPORATION MOVINCOOL OFFICE PRO 24 - Manual (Page 12)

12
!
WARNING
!
CAUTION
PROCEDURE
TYPE 1 TYPE 2
5. If test fails, do not use.
4. Press reset button once again for use. Light should turn on.
3. Press test button once, light must turn off.
2. If light is not on, press reset button once. Light should turn on.
1. Plug into grounded power receptacle.
Test device once when AC is installed to assure proper operation.
8. Do not push test and/or reset buttons in a short period.
7. Conductors inside this cord are surrounded by shields, which
monitor leakage current. These shields are not grounded, and they
are periodically examined the cord for any damage. Do not use
this product in the event the shields become exposed.
6. Using the device beyond recommended voltage poses risk to users.
5. In the event that this device trips, the cause of malfunction should
be corrected first before further use.
4. This device must only be plugged into an appropriate wall outlet.
Do not use on extension cords or adapter. Do not remove ground prong.
3. Do not immerse in water.
2. This device is used for monitoring leakage current.
1. Read the attention print on the device for proper use and handling
of this device.
INSTALLATION (cont.)
LCDI Power Cord Instruction
The LCDI device is non-serviceable device.
Attempting to open the device may expose the user to hazardous of
electric shock, and could void warranties of this product.
Manufacturer’s reliability is limited to the replacement of the device.