Avalue ERX-Q67 - Manual (Page 81)

ERX-Q67 User’s Manual
ERX-Q67 User’s Manual 81
 Flow Control [None]
Flow control can present data loss from buffer overtime. When sending data, if the receiving
buffers are full, a
‘stop’ signal can be sent to stop the data flow. Once the buffers are empty, a
‘start’ signal can be sent to re-start the flow. Hardware flow control uses two wires to send
start/stop signals.
Configuration options: [None][Hardware RTS/CTS][Software Xon/Xoff]
Microsoft Windows Emergency management Services (EMS) allows for remote management
of a Windows Server OS though a serial port.
Configuration options: [COM0 (Disabled)][COM4 (Pci Dev0, Func0) (Disabled)]
3.4.15 Chipset