Avalue ERX-Q67 - Manual (Page 56)

ERX-Q67 User’s Manual
56 ERX-Q67 User’s Manual
 VGA Palette Snoop [Disable]
Enables or disables VGA palette registers snooping.
Configuration options: [Disabled] [Enabled]
 PERR# Generation [Disable]
Enables or disables PCI devices to Generate PERR#.
Configuration options: [Disabled] [Enabled]
 SPERR# Generation [Disable]
Enables or disables PCI devices to Generate SPERR#.
Configuration options: [Disabled] [Enabled]
PCI Express Device Settings
 Relaxed Ordering [Disable]
Enables or disables PCI Express devices Relaxed Ordering
Configuration options: [Disabled] [Enabled]
 Extend Tag
If [Enabled] allows device to use 8-bit tag field as a requester.
Configuration options: [Disabled] [Enabled]
 No Snoop [Enabled]
Enables or disables PCI Express devices no snoop option.
Configuration options: [Disabled] [Enabled]
 Maximum payload [Auto]
Set maximum payload of PCI Express device or allow system BIOS to select the value.
Configuration options: [Auto] [128 Bytes] [256 Bytes] [512 Bytes] [1024 Bytes] [2048 Bytes]
[4096 Bytes]
 Maximum Read Request [Auto]
Configuration options: [Auto] [128 Bytes] [256 Bytes] [512 Bytes] [1024 Bytes] [2048 Bytes]
[4096 Bytes]