Avalue ERX-Q67 - Manual (Page 25)

ERX-Q67 User’s Manual
ERX-Q67 User’s Manual 25
2.4.2 Installing the CPU Heatsink and Fan
Intel® Core™ i7/ i5/ i3 LGA1155 processor requires a specially designed heatsink and fan
assembly to ensure optimum thermal condition and performance.

Install the motherboard to the chassis before you install the CPU
fan and heatsink assembly.

When you buy a boxed
Intel® Core™ i7/ i5/ i3 LGA1155
processor , the package includes the CPU fan and heatsink
assembly. If you buy a CPU separately, make sure that you use
only Intel® certified multi ‑ directional heatsink and fan.
 Your
Intel® Core™ i7/ i5/ i3 LGA1155 processor
LGA1155
heatsink and fan assembly comes in a push-pin design and
requires no tool to install.
If you purchased a separate CPU heatsink and fan assembly, make
sure that you have properly applied Thermal Interface Material to the
CPU heatsink or CPU before you install the heatsink and fan
assembly.
1. Place the heatsink on top of the installed CPU, making sure that the four fasteners match
the holes on the motherboard.
Orient the heatsink and fan assembly such that the CPU fan cable is
closest to the CPU fan connector.

Make sure each fastener is oriented as shown, with the narrow
groove directed outward.
Motherboard hole
Fastener
Narrow end of
the groove