Avalue EPI-QM77 - Manual (Page 68)

EPI-QM77
68 EPI-QM77 User ’s Manual
Item Option Description
Graphics Turbo IMON Current 14 ~31[Default]
Graphics turbo IMON current
values (14 -31)
Primary Display
Auto
IGFX[Default]
Select which of IGFX/PEG/PCI
Graphics device should be
Primary Display Or select SG for
Switchable Gfx.
Internal Graphics
Auto[Default]
Disabled
Enabled
Keep IGD enabled based on the
setup options.
GTT Size
1MB
2MB[Default]
Select the GTT size
Aperture Size
[128MB]
[256MB] [Default]
[512MB]
Select the Aperture Size
DVMT Pre-Allocated
[32M] [64M] [Default]
[96M] [128M] [160M] [192M]
[224M] [256M] [288M] [320M]
[352M] [384M] [416M] [448M]
[480M] [512M] [1024M]
Select DVMT 5.0 Pre-Allocated
(Fixed) Graphics Memory size
used by the Internal Graphics
Device.
DVMT Total Gfx Mem
[128MB]
[256MB] [Default]
[MAX]
Select DVMT5.0 Total Graphic
Memory size used by the Internal
Graphics Device.
Gfx Low Power Mode
Disabled
Enabled[Default]
This option is applicable for SFF
only.
Graphics Performance
Analyzers
Disabled[Default]
Enabled
Enable or disable Intel Graphics
Performance Analyzers Counters.
Primary IGFX Boot Display
VBIOS Default[Default]
CRT
DVI
LVDS
HDMI
Select the Video Device which will
be activated during POST. This
has no effect if external graphics
present. Secondary boot display
selection will appear based on
your selection. VGA modes will be
supported only on primary
display.
Spread Spectrum clock Chip
Off[Default]
Hardware
Software
>>Hardware : Spread is controlled
by chip;>>Software : Spread is
controlled by BIOS.
ALS Support
Disabled[Default]
Enabled
Valid only for ACPI. Legacy= ALS
Support through the IGD INT10
function. ACPI= ALS support
through an ACPI ALS driver.
Active LFP
No LVDS
eDP Port-A[Default]
Select the Active LFP
Configuration. No LVDS: VBIOS
does not enable LVDS. Int-LVDS:
VBIOS enables LVDS driver by
Integrated encoder. SDVO LVDS:
VBIOS enables LVDS driver by