Avalue EPI-QM77 - Manual (Page 48)

EPI-QM77
48 EPI-QM77 User ’s Manual
Item Options Description
Automatic Thermal Reporting
Disabled,
Enabled[Default]
Configure _CRT, _PSV and _AC0
automatically based on values recommended
in BWG
’s Thermal Reporting for Thermal
Management settings. Set to Disabled for
manual configuration.
Active Trip Point 0 Fan Speed 0 ~ 100[Default]
Active Trip Point 0 Fan Speed in percentage.
Value must be between 0 (Fan off) -100 (Max
fan speed). This is the speed at which fan will
run when Active Trip Point 0 is crossed.
Active Trip Point 1
Disabled
15/23/31/39/47/55/63/71/
79/87/95[Default]
/103/111/119C
This value controls the temperature of the
ACPI Active Trip Point 1 - the point in which
the OS will turn the processor fan on Active
Trip Point 1 Fan Speed.
Active Trip Point 1 Fan Speed 0 ~ 100
Active Trip Point 1 Fan Speed in percentage.
Value must be between 0 (Fan off)
– 100 (Max
fan speed). This value must be less than
Active Trip Point 0 Fan speed. This is the
speed at which fan will run when Active Trip 1
is crossed.
Passive TC1 / TC2 Value 1-16
This value sets the TC1/TC2 value for the
ACPI Passive Cooling Formula. Range 1-16
Passive TSP Value 2 ~ 32
This item sets the TSP value for the ACPI
Passive Cooling Formula. It represents in
tenths of a second how often the OS will read
the temperature when passive cooling is
enabled. Range 2- 32
PCH Thermal Device Enable or Disable PCH Thermal Device (D31:F6)
PCH Temp Read
Disabled,
Enabled[Default]
PCH Temperature Read Enable
CPU Energy Read
Disabled,
Enabled[Default]
CPU Energy Read Enable
CPU Temp Read
Disabled,
Enabled[Default]
CPU Temperature Read Enable