Avalue ECM-PNV - Manual (Page 79)

User’s Manual
ECM-PNV User’s Manual 79
4.6.2.8 APM Configuration
The APM Configuration menu allows the advanced power management options to be
configured.
Item Options Description
Power Management/ APM
Enabled,
Disabled
This item helps to select power management
mode.
Power Button Mode
On/ Off,
Suspend
This section allows you to select power button
mode.
Restore on AC Power Loss by
IO
Power On,
Power Off,
Last State
Use this to set up the system response after a
power failure.
Resume On Ring
Disabled,
Enabled
Use the Resume on Ring BIOS option to
enable activity on the RI (ring in) modem line
to rouse the system from a suspend or
standby state. That is, the system is roused by
an incoming call on modem.
Resume On PCIE
Disabled,
Enabled
Use the Resume on PCIE BIOS option to
enable activity on the PCIE signal to rouse the
system from a suspend or standby state.
Resume On RTC Alarm
Disabled,
Enabled
Use the Resume on RTC Alarm option to
specify the time the system should be roused
from a suspend state.