Angelcare AC1100 User Manual
Page 9

1) Press Menu icon to access
main menu.
2) Press settings icon
to access sub-menu.
3) Press movement sensitivity icon to choose
the desired sensitivity level (1 to 5).
4) Press OK icon to confirm.
TO ADJUST THE SENSOR PAD SENSITIVITY LEVEL:
TO ACTIVATE THE TIC FUNCTION:
Allows you to hear a TIC sound when Sensor Pad function is activated.
1
OK
1) Press Menu icon to access
the main menu.
2) Press TIC icon to activate or deactivate
the tic function.
3) Press OK icon to confirm.
2
ON
OFF
TO STOP THE ALARM
Press the Parent
Unit Motion
Alarm icon
Press the Nursery
Unit’s Main button
Hold down left ‘wing’
button for two seconds
to turn OFF the Unit
Regular TIC sound will emit from Parent Unit
and a moving pendulum will appear
on Parent Unit indicator bar
OR
1
OK
2
OK
OFF
ON
ON
3
IMPORTANT
• The Sensor Pad is not designed for use with adults, children or infants older
than 24 months.
• Once you are finished using the Sensor Pad, please remove it from the baby’s
crib and store it away.
NOTE:
If you are receiving false alarms,
adjust the sensitivity level.
1) Press Menu icon to access
main menu.
2) Press sound icon to activate
or
deactivate sound.
3) Press OK icon to confirm.
5.2 - SOUND
TO TEST SOUND:
Ask someone to speak into the Nursery
Unit or place the unit near a radio to ensure
that sound is being picked up.
ADJUST SOUND LEVEL
PUT IN SILENT/MUTE MODE
PUT IN DIALOGUE MODE
Raise volume (+)
Lower volume (-)
Press the (-)
button for 2
seconds to
mute sound.
Press and hold
talk button to
speak to baby.
ON
OFF
TO ACTIVATE SOUND:
5.3 - BATTERIES
HOW TO CHECK THE BATTERIES:
Unplug the Adapters from both units.
• If the green light on the Nursery Unit does not show, replace the batteries.
• If the Parent Unit and its screen do not light up, recharge the batteries.
1
OK
2
IF YOU HEAR NO SOUND:
• Check that both units are powered on.
• Check that both units are plugged
into functioning electrical outlets.
• Check the batteries in both units
(replace or recharge them if necessary).
• Bring Parent Unit closer to Nursery Unit.
IMPORTANT
To avoid feedback (whistling), keep
both units at least 3 m apart.
HOW TO CHARGE THE BATTERIES IN THE PARENT UNIT:
Leave the Parent Unit in the Charging Cradle
to fully charge the unit. Although the batteries
at 1/3 capacity works normally, we recommend
that you fully recharge them.
1/3 full
2/3 full
full
PARENT UNIT BATTERY ALARM
• Alarm activates when the batteries need to be recharged.
• Parent Unit will emit a beep sound every 15 seconds.
• Battery Alarm icon will show on LCD screen.
17
16