ºc ºf – Angelcare AC1100 User Manual
Page 11
6.2 - ALARM
Allows you to select your preferred alarm mode for the Parent Unit.
1) Press the Menu icon to access
main menu.
2) Press the settings icon
to access sub-menu.
3) Press the Alarm icon to change
the alarm mode.
4) Press OK to confirm.
IMPORTANT
When in setting mode no sound or alarms will transmit to the Parent Unit, except
the movement alarm (if this function was already activated).
Sound alarm will replace vibration
mode when the Parent Unit is
in its Charging Cradle.
Sound alarm only
Sound alarm
and vibration
Vibration only (the alarm will
not sound on Parent Unit but
it will on Nursery Unit).
1
OK
2
OK
OFF
ON
ON
3
Alarm Mode icon
shows in the top bar
of the Parent Unit.
6.3 - HOLD
Allows you to put your Angelcare Monitor on HOLD.
1) Press the Menu icon to access
main menu.
2) Press the Hold icon
OR
Press and hold the
Nursery Unit
Main button for at least 2 seconds.
3) Hold icon will appear on the screen.
4) Press the Hold icon or Nursery Unit
Main button again to return
to normal operation.
Nursery Unit Night Light will blink.
Parent Unit will emit 3 consecutive
beeps every 30 seconds to remind
you that monitor is on hold.
IMPORTANT
When your monitor is on hold, the motion-detection feature and motion alarm
are disabled.
1
OK
2
2
6.4 - THERMOMETER
TO CHANGE THE MEASUREMENT UNIT:
1
1
1
OK
OK
OK
1) Press the Menu icon to access
main menu.
2) Press the temperature icon to access
sub-menu.
3) Press the ˚C ˚F icon to change from
Celsius to Fahrenheit.
4) Press OK to confirm.
1) Press the Menu icon to access
main menu.
2) Press the temperature icon to access
sub-menu.
3) Press the Temperature Alarm icon
to
activate or deactivate
temperature alarm.
4) Press OK icon to confirm.
2
2
2
o
C
ºC
ºF
ON
o
F
ºC
ºF
OFF
Celsius
ON
Fahrenheit
OFF
Temperature Alarm icon:
Indicates temperature alarm
is active.
TO SET THE TEMPERATURE RANGE:
TO ACTIVATE THE TEMPERATURE ALARM:
OK
30
o
C
15
o
C
o
C
ON
-
+
ºC
ºF
OK
30
o
C
15
o
C
o
C
ON
-
+
ºC
ºF
OK
30
o
C
15
o
C
o
C
ON
-
+
ºC
ºF
1) Press the Menu icon to access
main menu.
2) Press the temperature icon to access
sub-menu.
3) Press (+ or -) to set maximum
temperature range (15 to 32
˚Celsius
/59 to 90 ˚Fahrenheit).
4) Press (+ or -) to set minimum
temperature range (5 to 20 ˚Celsius
/41 to 68 ˚Fahrenheit).
5) Press OK icon to confirm.
3
3
3
4
TEMPERATURE ALARM
• Alarm activates when temperature rearches maximum or minimum set temperature.
• Parent Unit will emit 4 consecutive beeps, every 5 seconds.
• Temperature Alarm icon will show on LCD screen.
The range between the minimum and maximum
temperature must be at least 4
˚
C/7
˚
F. An error
tone will be heard if you try to set it up below
this minimum level.
21
20