Angelcare AC1100 User Manual
Page 12

6.5 - VIDEO
Allows you to turn video function ON or OFF.
6.6 - SCREEN SAVER
Allows you to set the screen saver starting point.
MANUAL SETTING:
To trigger manually the screen saver mode push the Parent Unit
Power button.
Do not push it for more than 2 seconds since this will shut down the Parent Unit.
1) Press the Menu icon to access
main menu.
2) Press the Video icon to activate
or
deactivate the video function.
3) Press OK to confirm.
4) Press the Menu icon to return
to main menu.
1) Press the Menu icon to access
main menu.
2) Press settings icon
to access sub-menu.
3) Press the Screen Saver icon to select
the delay before video mode turn
into screen saver mode.
4) Press OK to confirm.
NOTE:
Screen Saver icon will appear
when video is in Screen Saver mode.
ON
OFF
1
OK
2
OFF
4
3
1
OK
2
OK
OFF
ON
ON
3
OFF/5/10/15/20 sec
TO REVERT BACK TO CAMERA CAPTION
Press talk button
Push the ON/OFF
(but do not hold down for more
than 2 seconds or unit will shut off)
OR
OR
Press the screen
6.7 - INFRARED NIGHT VISION
Allows you to capture image when lighting is unsufficient.
6.9 - PAGER
Allows you to locate the Parent Unit.
TO LOCATE PARENT UNIT:
Press Nursery Unit main button for less
than 2 seconds. The Parent Unit will emit
a paging sound for one minute.
AUTO: The infrared LEDS will turn on automatically
when the lighting is not sufficient. The image
transition takes 20 seconds
ON: The infrared LEDS are ON at all times.
OFF: The infrared LEDS are OFF at all times.
The Moon icon will appear
when the infrared LEDS are ON.
There are 4 built-in infrared LEDs
on the Nursery Unit to enable clear
black and white image. The image
transition takes 20 seconds.
TO ACTIVATE NIGHT VISION:
Press the
Night Vision icon to chose available modes:
TO STOP THE PAGING SOUND:
Press the Parent
Unit screen
Press the Nursery Unit’s
main button
OR
6.8 - NIGHT LIGHT
Allows you to use your monitor as a night light.
TO ACTIVATE THE LIGHT:
Push
right ‘wing’ of Nursery Unit to the night light
ON or OFF.
IMPORTANT
If you press the Main
Button for more than 2
seconds, you will put the
movement monitoring on
Hold. To Unhold, push the
button again.
23
22