AMT Datasouth Fastmark PT-1 - Manual (Page 22)

22
Fastmark PT1 User ’s Guide
Connecting the Printer
The FASTMARK PT1 interface includes RS-232, USB (2.0), IrDA, and Bluetooth 2.0.
USB and RS-232 communication cables are optional accessories.
USB & RS-232 Communications:
No additional setups are required for cable communications.
 USB:
Once the USB cable is connected, the printer will detect automatically and link to host, without
emitting beeps.
 RS-232:
When the printer is off and RS-232 cable is connected, the printer will emit 3 beeps and
automatically switch to RS-232 mode. Next time the printer is turned on with RS-232 cable
connected, the printer will emit 1 beep (Bluetooth mode), and then 3 beeps to indicate RS-232
mode.
When RS-232 cable is disconnected, the printer will emit 1 beep and switch back to Bluetooth
mode.
Note: Turn off the printer before connecting or disconnecting USB
or RS-232 interface cables.