Smart battery power management – AMT Datasouth Fastmark PT-1 User Manual
Page 21
21
Fastmark PT1 User
’s Guide
The following table explains control and indicator functions to help understand LED indications
and printer status:
Smart Battery Power Management
The portable printer is equipped with a Li-ion battery pack (7.4V 2200mAH). With the Smart
Battery Power Management function, FASTMARK PT1 is able to monitor and automatically
remind operators of different battery power status:
Battery
Power
Status
Printer’s Indications
Charging
Mode
Battery Green LED remains On (Charging Mode)
If the Battery is fully charged, LED will be off.
10%
Battery LED blinks slowly
(Reminder: battery power will be 5% in about 30-60
minutes)
5%
Battery LED blinks + warning beeps
(Reminder: battery power will be 0% in about 30-60
minutes)
0%
Printer suspends printing (some minor power remains)
Printer Status
Power
LED
(Green)
Battery LED
(Yellow & Red)
Media LED
(Orange)
Communication
LED (Blue)
Beep
Power On
ON
Power Off
Media Out
ON
Blinking
Beep
Bluetooth
Connection
ON
ON
Beep x1
IrDA Connection
ON
Beep x2
RS232 Connection
ON
Beep x3
Charger Connected
ON (Yellow)
Battery Low
ON
Blinking slowly
(Red)
Battery Out (printer
will power off)
ON
Blinking fast
(Red)
Beep
Note:
If the standby duration
exceeds 3 minutes,
the printer will turn off
automatically in order
to decrease power
consumption.
The standby duration is
changeable, to be set
by operators; the
printer default standby
duration is 3 minutes.